Complete NAND Flash Solution: Logic, PHY and File System Software
Publication: Design & Reuse
March 31, 2011 -- Designers using NAND Flash devices should follow the ONFI standard interface to ensure that their controller design will operate with devices from any vendor. The memories need both digital and analog interfaces between the devices and the system they serve. When designers add NAND devices to the system design they must consider the least expensive and lowest risk means of implementing the controller.
By Dennis McCarty. (McCarty is with Arasan Chip Systems, Inc.)
Reprinted from SOCcentral.com, your first stop for ASIC, FPGA, EDA, and IP news and design information.